Solar power inverter with charger, DC to AC,LCD display,Pure sine wave,High frequency

*New products *LCD digital display inverter *True sine wave inverter with charger 5kva/4.2kw *CE&ROHS&SGS *OEM/ODM

PSC LCD digital display high frequency pure sine wave Inverter 3000W-5000W WITH CHARGER is mainly used for solar power station; home solar power systems, mobile solar power system and DC wind solar generating systems.LCD Offgrid ture sine wave inverter with charger 5KVA/4.2KW

Main Features:1. LCD digital display will show voltage, frequency, battery and load information.2. Built in AC charger will charge batteries automatically.3. High-frequency switching technology for compact size and light weight4. Pure sine wave output (THD<3%) for wide range of applications and harsh environment5. High efficient DC-to-AC conversion minimizing energy loss6. N+X parallel redundancy framework design for future expansion7. "All master" dynamic mechanism eliminate single point failure to optimize reliability8. Low power "Power Saving Mode" to conserve energy for less than 15W9. High power density design  10. Input/output isolated design for the maximum operation safety11. Intelligent cooling fan speed control determined by loads12. Comprehensive status LED indicators13. DSP Control14. Multiple protection: Input low voltage / Overload / Short circuit / Low battery alarm / Input over voltage / over temperature15. Wall-Mount design for flexible placement 

Main technical parameters

Inverter Mode Specifications

MODEL	PSC5K-48	PSC5K-96
Output Voltage Waveform	Pure Sine Wave
Rated Output Power(VA)	5000
Power Factor	0.84
Nominal Output Voltage(V)	230Vac
Output Frequency(Hz)	50Hz / 60Hz ± 1Hz
Output Voltage Regulation	±10% rms
Nominal Efficiency	>90%
Over-Load Protection	fault after 5s@≥150% load, fault after 10s@110%~150% load,
Surge rating	10000VA
Capable of starting electric motor	2.5HP
Output Short Circuit Protection	Current limit (Fault after 4 cycles max)
Bypass Breaker Size	40A
Nominal DC Input Voltage	48V	96V
Min DC start voltage	40V	80V
Low DC Alarm	42.0 ± 1.2Vdc	84.0± 2.4Vdc
Low DC Alarm Recovery	43.2 ± 1.2Vdc	86.4± 2.4Vdc
Low DC Shut-down	40.0±1.2Vdc	80.0±2.4Vdc
Low DC Shut-down Recovery	44.0±1.2Vdc	88.0±2.4Vdc
High DC Shut-down	60.0±1.2Vdc	120.0 ±2.4Vdc
High DC Shut-down Recoveryµ	58.0±1.2Vdc	116.0 ±2.4Vdc
Power saver setting	0W (Set “OFF” at LCD) 10±5W enter 5+/-2w leave (Set “ON” at LCD)
Tare loss(nominal)	Saver OFF:<50w Saver ON:<10w
DC component of AC output	<100mv
Half wave load detection	Yes(when unbalance current>35A)

µ Note: Necessary condition for DC low recovery is: Line voltage must be available for charging.

Any doubts about this item,please contact Vicky for more infomation!

Solar power inverter with charger, DC to AC,LCD display,Pure sine wave,High frequency